This release note and the software that accompanies it are copyright (c) 2013, Intel Corporation or its suppliers, and may only be installed and used in accordance with the license that accompanies the software.

This Software is furnished under license and may only be used or copied in accordance with the terms of that license. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. The Software is subject to change without notice, and should not be construed as a commitment by Intel Corporation or its suppliers to market, license, sell or support any product or technology. Unless otherwise provided for in the license under which this Software is provided, the Software is provided AS IS, with no warranties of any kind, express or implied. Except as expressly permitted by the Software license, neither Intel Corporation nor its suppliers assumes any responsibility or liability for any errors or inaccuracies that may appear herein. Except as expressly permitted by the Software license, no part of the Software may be reproduced, stored in a retrieval system, transmitted in any form, or distributed by any means without the express written consent of Intel Corporation.

==========================
Supported RAID Controllers
==========================
This download provides support for the Intel(R) C600/C222/C224/C226 chipsets on both AHCI Capable SATA Controller and SATA/SAS Capable Controller in Intel(R) Rapid Storage Technology Enterprise (RSTe) mode. 
 
Please verify that this package has been tested with the RAID device you have chosen to use by checking the drivers web page for your controller 
at http://support.intel.com.

===================
Package Information
===================
Package Version = 3.8.0.1111
The iaStorA driver version is 3.8.0.1106
The iaStorS driver version is 3.8.0.1106
The iaStorA Win8/Win2012 driver version is 3.8.0.1106
The iaStorS Win8/Win2012 driver version is 3.8.0.1106
OS supported = Microsoft* Windows 2012 (x64), Windows 8 (x86 & x64), Windows 2008R2 (x64), Windows 7 (x86 & x64), Windows 2008 (x86 & x64), Windows 2003 R2SP2 (x86 & x64)

==========
Attention!
==========


==================
Known Restrictions
==================
1. SAS features are enabled on SATA/SAS Capable Controller if appropriate Intel(R) RAID C600 Upgrade Key is present in the system.
2. RAID 5 is no longer supported by SATA/SAS Capable Controller when SAS features are enabled.
3. Only 4 drive RAID 10 is supported at this time.
4. MPIO Load Balancing in RAID Mode is unsupported
5. A SAS Wide port spanning SCU0 and SCU1 is not supported.
6. Plugging both SCU into the same expander is not supported
7. Some WD 6G SAS drives (S25/S35 family) are not supported
8. POST messages are displayed only if more than one drive is attached.
9. Performing a RAID Migration/Rebuild may not result in all of the appropriate LEDs blinking correctly.
10. A manual verify/repair may be required after an unexpected shutdown with running heavy I/O on a RAID volume.
11. RAID volume names should be less than 16 characters.
12. 3.7 release does not support Windows Vista.  Use prior release for Windows Vista.

=======================
Contents in the package
=======================
The following files(or folders) are included in this package:
Name							Description
RSTe_Windows_DRV_v3.8.0.1111_readme.txt			This file
G40440-002_RSTe_SWUG_R1_5.pdf				RSTe Software User's Guide
/Drivers						Drivers for Windows*
/GUI							Graphical User Interface for Windows*
/CLI							Command Line Interface
/CIM							System Management Utility for Windows*	

=========================
Installation Instructions
=========================
This updated driver can be applied using the normal OS installation options.

For detailed installation instructions, please refer to Intel RSTe Software User's Guide in this package.

=============
Fixes/Updates
=============
Version 3.8.0.1111
1. Adds support for Windows Server 2012 R2 and Windows 8.1

Version 3.7.0.1093
1. Adds support for configuring RAID when EFI Optimixed Boot is Enabled with UEFI 2.3.1/HII-capable system BIOS (See BIOS release notes)
2. Adds TRIM support when SSDs are configured as RAID 0/1/10
3. Adds the capability to view expander and update expander fw in Windows 8 and Server 2012.
4. 3.7 drops support for Windows Vista


Version 3.6.0.1093
1. Adds support for boot through expander in legacy mode with the latest system BIOS.
2. Resolves manufacturer and model number may not match between RSTe GUI and RSTe system report.
3. Resolves potential data loss when using Solid State drives (SSDs) that do not support power safe write cache (Standby Immediate issue with SSD's.)


Version 3.5.1.1009
1. Resolves Standby Immediate issue with SSD's (TA #510520).

Version 3.5.0.1101
1. Adds support for Windows 8 and Server 2012.
2. Adds support for Intel(R) C222/C224/C226 chipset.

Version 3.2.0.1134
1. Adds support for drive LEDs (fault/locate/rebuild) when drives attached to SCU through an expander.
2. Adds Windows 2003 R2 SP2 32 bit support.

Version 3.1.0.1085
1. Resolves GUI/driver installation errors if no drives attached to AHCI controller
2. S3/S4 support enabled.

Version 3.0.0.3020
1. Initial public release.

*Other names and brands may be claimed as the property of others.