;===============================================================================
; ASPEED Graphcis UEFI Driver Release Notes
;===============================================================================
v.0.99.10: ycchen@040714
01.[Bug] [DP501] Fixed No Display Issue if BMC reset
02.[Bug] [DP501] Fixed No Display Issue with DP2VGA dongle(chipset:ST,fw:v.1.5 and before) + KVM ATEN CS-1316
03.[Bug] [DP501] Fixed No Display Issue with DP2VGA dongle(chipset:ST,fw:v.1.5 and before) + ASUS VS228H
v.0.99.08: ycchen@021714
v.0.99.07: ycchen@012414
01.[Bug] [DP501] Fixed Screen Blank Sometimes and need to re-plug to resume
v.0.99.06: ycchen@010714
01.[Bug] [DP501] Fixed Screen Blank Sometimes even re-plug DP connector
v.0.99.05: ycchen@122613
01.[Bug] [DP501] Fixed Screen Blank Sometimes even re-plug DP connector
02.[New] [DP501] Modify for Lenovo Ramjet and Renegade SDV
v.0.99.04: ycchen@120613
01.[Bug] [DP501] Fixed EDID cannot be read properly when system reset
v.0.99.03: ycchen@112913
01.[Bug] [DP501] Fixed monitor noise when system reboot or shutdown
v.0.99.01: ycchen@112113
01.[Bug] [DP501] Fixed DP Monitor Compatible Issue
v.0.99.00: ycchen@111113
01.[New] [DP501] Direct Access EDID
------------------------------------------------------------------------------- 
v.0.98.04: ycchen@110113
01.[Bug] Fixed AST2400 + DP501 cannot display issue
v.0.98.01: ycchen@100813
01.[New] Support AST2400 + DP501
02.[Bug] Fixed Driver Version not show correctly issue
03.[Bug] Fixed Win2008 Installation Screen Abnormal with UEFI + Legacy option ROM
04.[New] use MMIO instead
------------------------------------------------------------------------------- 
v.0.97.06: ycchen@032013
01.[New] Support AST2300/2400 + DVO, AST2300 + ITE66121
02.[Bug] Modify for Read EDID un-stable issue
v.0.97.05: ycchen@121812
01.Remove Wide Screen Support
v.0.97.04: ycchen@112912
01.[AST2300/2400] [Bug] Modify for DRAM Settings by H/W Request
02.[New] Support Wide Screen Modes
03.[Bug] [AST1100/2050/2100/2150/2200] Fixed Display Abnormal Issue in VGA only mode
04.[New] [AST2300] Disable ASPM in GOP driver
05.[New] [AST2300/2400] Support AST2300/2400 + ITE66121
-------------------------------------------------------------------------------
v.0.96.00: ycchen@081412
01.[Bug] Fixed failed to install Win8
02.[New] [AST24000] Support AST2400
03.[New] [AST2300/2400] Modify DRAM Setting for H/W Request (2012_5_9)
04.[New] [AST2300/2400] Set VGA as DAC output
v.0.93.08: ycchen@053111
01.[New] [AST2300] Modify MCLK to 396MHz by H/W request
v.0.93.07: ycchen@050911
01.[Bug] Fixed it takes too long time to get EDID from EDID failed monitor
v.0.93.04: ycchen@030411
01.[New] [AST2300] Modify for DDR3 2Gb Support
02.[New] [AST2300] Slow Down CPU/AHB clock in VGA only mode
v.0.93.03: ycchen@021511
01.[New] [AST2300] Modify AST2300 DRAM Timing by H/W Request (020811)
02.[New] [AST2100/2150] Enable AST2100/2150 DRAM Calibration by H/W Request (021411)
v.0.93.02: ycchen@122410
01.First Release
